2000SDR Chamberlain LiftMaster Screwdrive MAIL IN LOGIC BOARD REPAIR SERVICE

Description

Hello and thank you for considering me to repair your faulty 2000SDR Screwdrive Logic Board.
Are you are experiencing any of the following symptoms below?
1) No light on garage door wall button.
2) Orange LED at one of the beam sensors.
3) Light bulb on motor assembly is not working or flashes.
4) Erratic flashing light on garage door wall button.
5) Garage door will not go up or down.
6) Radio Frequency failure. Remotes not working or programming.
7) Garage Door goes up, not down or down and not up.
8) Clicking....
9) Dead, noting happens.
10) LIGHTENING STORM DAMAGE!
I can repair your logic board if you have any of these symptoms listed above. I stock the components needed to repair your issue and I use much higher quality parts that will last a very long time.
The way it works is you safely remove your logic board from the motor assembly by unplugging the AC cord from the wall power outlet. The transformer will be hot to touch, so wait about five minutes before removing the motor assembly housing. Please note the logic board is mounted inside the housing cover and is attached to a grey mounting board. Remove the wire harness from the logic board by gently pulling it out. Remove the screws holding the logic board mounting plate then carefully unscrew the 5 screws holding the logic board. If you have problems or have any questions you can message me and I'll help.
PLEASE SEPERATE THE GREY MOUNTING PLATE FROM THE LOGIC BOARD BY UNSCREWING 5 PHILLIPS HEAD SCREWS. I RECOMEND USING ZIP TIES TO REINFORCE AT LEAST 4 OF THE 5 SCREW STANDOFFS. THEY MIGHT BREAK AND THE TIGHTLY FASTENED ZIP TIES PREVENT THE STANDOFFS FROM BREAKING.
PLEASE ONLY SHIP THE LOGIC BOARD.
Please wrap the logic board well in a nonconductive material, like newspaper. No plastic bags unless they are ESD SAFE! Use good packing medium and a shipping box only! I have received units in soft pack shipping envelopes and they always get damaged.
Once you purchase my service I will send you an eBay message telling you my shipping address.
You'll pay for your own flavor of shipping, ship me the logic board and please send me a tracking number!
I'll repair it the same day I receive it, test all functions on an actual computer controlled motor assembly, and will ship your logic board ASAP!
I will warranty my parts and labor for 3 YEARS, starting as soon as you receive your functioning logic board. This is a Specialty Repair Service and I couldn't turn on the Return Accepted feature. I will accept returns in form of repair,  just message me:)